This is a super handy Solenoid Valve that is compatible with small 1/4inch diameter tubing that is often referred to as 6.5mm or 6.35mm OD to be exact.
This part is made from metal and POM engineering plastic so it is durable and suitable with contact with a wide range of chemicals and beverages.
Suitable for pressures up to 115psi/8bar/1000kPa, this will handle water pressure no problem at all.
Combine this with an inline regulator if you want to drop your mains water pressure, like using with a water filtering system or reverse ozmosis system.
Unlike some other solenoid valves, this is a direct acting solenoid valve meaning the solenoid valve can go down to 0 pressure. This makes it quite handy for controlling CO2 flow or other low pressure gasses.
If you want to use this solenoid valve with the various other 8mm tubing that we sell you can use this reducer KL07481.
Specs:
- Inlet/Outlet: 1/4inch (6.3mm)
- Pressure rating: 0-8Bar (115psi)
- Mode: Normally Closed (NC)
- Solenoid Coil Voltage: 12V
- Solenoid Coil Amp Draw: 1.1 amp
From: Kegland
