The Series X.1 Stainless Kegerator base unit, which includes:
- Kegerator Main Body
- MK4 Regulator
- Wire Shelf
- Black Plastic Wrap Around Drip Tray
- Castor Wheels
- CO2 Cylinder Holder (designed to suit 2.6kg gas cylinder)
- Chrome Plated Guard Rail
Compatible with carbonation cap and Duotight 6.5mm x 8mm reducer (not included) for gas entry on the back of the unit, as per photo.
Note: this is the base unit only, there are no taps, connectors or font included. See our other kegerator listings if you want the tower and taps.
This is the new Series X.1 model which has serval major advancements:
- 10% More Energy Efficient
- 15% Faster Cooling
- Thicker Side Walls
- FITS 4 KEGS!
Series X Kegerator Specs (base unit) approx. dimensions:
- 600mm Wide
- 650mm Deep
- 840mm Height (excluding castor wheels and the height of guard rail, drip tray or font)
- 890mm Height of the fridge part (including castor wheels but excluding the height of guard rail, drip tray or font)
Minimum Clearance Required Around the Series X:
The Series X kegerator has radiators in the left- and right-hand walls of the kegerator. These radiators need to be well ventilated so that heat can be dissipated from within the kegerator to the external environment. A minimum of 100mm clearance is required on the left- and right-hand side and the back of the kegerator. Failure to leave this clearance may void the warranty as it is essential for proper cooling and can cause high electrical consumption and may cause the kegerator to fail prematurely.
From: Kegland
